Baskadia

METHOD STATEMENT FOR TEST OF REINFORCEMENT STEEL REBAR

2. SCOPE 2.1.BS 4449-2005:2016 specifies LIMITS for Tensile Strength, Yield Strength, Elongation, and Reduction of Area. 2.2.BS EN ISO 15630-1:2010 specifies test methods applicable to reinforcing bars, wires rods, and wire for concrete. 2.3.ISO 6892-1-2016 This part of the ISO 6892-1:2016 standard specifies the method for tensile testing of metallic materials and defines mechanical properties, which can be determined at room temperature

1 / 3

CONCRETE MEASURING DEPTH OF CARBONATION - METHOD STATEMENT

The carbonation test was carried out to determine the depth of concrete affected due to the combined attack of atmospheric carbon dioxide and moisture and causing a reduction in the level of alkalinity of concrete. The carbonation of concrete also lowers the number of chloride ions needed to promote corrosion and reduces the protection of steel against corrosion.

1 / 3

LOAD TEST OF CONCRETE FLEXURAL MEMBERS - METHOD STATEMENT

The load test will be carried out according to ACI 318M-11 Chapter 20 “Strength Evaluation of Existing Structures”.

1 / 5

DETERMINATION OF CONCRETE HONEYCOMB TESTING - METHOD STATEMENT

Ultrasonic pulse velocity equipment measures the transit time of a pulse between transducers placed on the surface of a body of concrete. The pulse velocity can then be calculated using the measured path length through the concrete.

1 / 4

Obtaining and Testing Drilled Concrete Cores

1 / 5