To better understand what an osmosis unit is used for, you must first know its operating mechanism. It is a multi-stage filtration system in which the water will be treated to remove pollutants and substances harmful to health. Large particles will be removed first. Then, as it progresses through the other filtration stages, it will be the turn of the finest molecules, to obtain only pure water with 98% H2O. The osmosis unit includes all of these stage filtration systems. The osmosis system works by reverse osmosis system, the water will be under strong pressure and pass through a porous membrane which retains all the particles in suspension to retain only the water molecules.
What is reverse osmosis made of?
To produce pure and healthy water, an osmosis unit is made up of several elements:
The conductivity meter: also called the resistivity meter is a component whose role is to control the portability of osmosis water in real-time. It also ensures the saturation of the membrane;
The rinsing system: this is a sequential membrane to prevent the proliferation of bacteria in the event of prolonged non-use. This part also ensures the life of the membrane;
The smoothing activated carbon post-filter: it eliminates tastes and odors retained in the water after it has passed through the pre-filter and the membrane;
Reverse osmosis membranes: the most important part whose role is to eliminate up to 98% of toxic minerals from tap water: nitrates, bacteria, viruses, etc.
Faced with the evolution of technology, distributors and manufacturers of osmosis models are constantly inventing more and more efficient devices at the cutting edge of technology. Today, the most efficient osmosis models have up to 6 levels of filtration. They are also equipped with a pre-filter and a post-filter. Very interesting points influence the benefits of reverse osmosis water filters.
Use and maintenance of the reverse osmosis water filteration system
(https://www.simpurelife.com/products/simpure-y7-countertop-water-filtration-system)
Using an osmosis water filtration system is relatively simple: once the filters and membrane are in place, all you have to do is open the tap and wait a while after the first draw. It is also necessary to perform a few priming draws before the water obtained is completely purified. Commissioning does not require any electrical connection: all you need to do is find a water distribution network, ideally a washing machine to do so.
For the maintenance and upkeep of this water filtration device, it is advisable to carry out regular checks of the various filters. If necessary, you should also remember to replace the parts according to their condition and the recommended frequency. After a long period without drawing osmosis water, it is also advisable to clean the filter housings and/or replace the cartridges to avoid any risk of bacteria proliferation. This is the only way you will get all the benefits of reverse osmosis.
0 件のコメント
この投稿にコメントしよう！
この投稿にはまだコメントがありません。
ぜひあなたの声を聞かせてください。
